Photovoltaic Systems

  • ● We have successfully designed, assembled, supplied, installed and commissioned at various Pipeline, RTU Shelters, Wellheads.
  • ● Complete Photovoltaic (SOLAR) System Solar Off grid / On grid system including solar panel, charge controller, DC-AC Inverter, battery Banks, mounting structure, Indoor or Outdoor enclosure, AC & DC distribution panel and cabling.
  • ● Onsite Installation Includes laying of Cable & Conduits, Install Equipment, Interconnection of Cables crimping/lugging.
  • ● Providing Load bank with variac to provide constant current discharge sized to battery capacity, D. C. ammeter, D. C. voltmeter, and timing clock.

MSR1 Solar Charge Controllers

The MSR1-10 24V NE Charge Controller is a stand-alone solar charge regulator designed for use in industrial applications. It features one Array Input rated at 10A and one Load Output rated at 5A (continuously rated). The unit is designed using well-proven technology and incorporates a 3-stage charging regime. Using remote Battery Voltage Sense connections plus an optional Battery Temperature Sensor, the maximum life and performance from the batteries can be expected. The unit features a 2-line 16-character LCD display and keypad. The end-user is able to view and adjust all regulation settings and alarm set, reset and delay values on site. Four programmable alarm relays with volt-free changeover contact and LED are included. The user is able to set which function activates which alarm relay, including Common Alarm, High Volts, Low Volts, High Temperature, Load Disconnect, Array Failure, Temperature Sense Failure, etc. The unit features an expansion port allowing connection of additional relays, optional RS232/RS485 communications port, 4-20mA transducers, etc..

 

Features

  • ● 3-stage series regulation.
  • ● 4 user-programmable alarm relays.
  • ● Remote battery voltage sensing.
  • ● Battery Temperature Compensation.
  • ● Regulation, Array Switch and Alarm Status LED’s.
  • ● Expansion port for optional modules.

MSR2-30 Solar Charge Controller

The Micha MSR2-30 Charge Controller is a stand-alone solar charge regulator designed for use in industrial applications. It features two Array Inputs rated at 15A each and one Load Output rated at 5A (continuously rated). The unit is designed using well-proven technology and incorporates a 3-stage charging regime. Using remote Battery Voltage Sense connections plus an optional Battery Temperature Sensor, the maximum life and performance from the batteries can be expected. The unit can be supplied with an optional 2-line 16-character LCD display and keypad and when fitted, the end-user is able to view and adjust all regulation settings and alarm set, reset and delay values on site. Four programmable alarm relays with volt-free changeover contact and LED are included. The user is able to set which function activates which alarm relay, including Common Alarm, High Volts, Low Volts, High Temperature, Load Disconnect, Array Failure, Temperature Sense Failure, etc. An optional RS232 port is also available.

 

Features

  • ● 3-stage series regulation.
  • ● 4 user-programmable alarm relays.
  • ● Remote battery voltage sensing.
  • ● Battery Temperature Compensation.
  • ● Regulation, Array Switch and Alarm Status LED’s.

MSRx Custom Solar Charge Controller

The Micha series of MSRx Charge Controllers is one of the most flexible solar regulator ranges available, giving the end-user the ability to meet the most demanding of specifications. The microprocessor-based control allows both pre-set and customs settings for all regulation values and alarm voltages, which can be readily modified using the alphanumeric LCD screen and keypad. A wide range of options are available, including additional alarm contacts, 4-20mA transducers, RS232/RS485 ports with data-logging and analogue and digital inputs – all of which can be programmed to suit.

 

Features

  • ● 3-stage series regulation.
  • ● 4 user-programmable alarm relays.
  • ● Remote battery voltage sensing.
  • ● Battery Temperature Compensation (Remote sensor included).
  • ● Regulation, Array Switch and Alarm Status LED’s.
  • ● 2 x 25A Load Outputs with configurable disconnect settings.
  • ● Expansion port for optional modules.